Welcome to the EVOLUTION
Get answers to common questions about EVOLV H2GO
QUICK ACTIONS
SELECT A CATEGORY
👋
DO THIS FIRST
BEFORE you use your H2GO
STEP 1
Remove the membrane cap from the base of the bottle
STEP 2
Fill bottle with water, soak for 10 minutes.
STEP 3
Charge with USB cable for 90 minutes.
GETTING STARTED
Download a digital version of the H2GO manual here .
Now you’re ready to make your first serving of H2 water! To maximize the benefits of your hydrogen water bottle, we encourage you to make it a daily part of your routine. Consistent use can lead to long-term wellness improvements and a more energized lifestyle.
Filling up:
-
Fill your H2GO with clean drinking water (we recommend purified or distilled) just below the neck of the bottle.
-
Do not overfill your bottle to the brim. leave a small amount of room at the top of the bottle so the Hydrogen can dissolve back into the water.
Make sure your bottle lid and base are cranked as tight as possible so you create an airtight seal during the H2 cycle.
Power On:
To power on your H2GO:
Quickly press the power button once (1 beep)
Quickly press 2 times if you want 10 minutes (2 beeps)
** It's important to not press and hold the button for any amount of time as that will trigger the off function.
Power Off
To turn off or cancel
Press and hold the power button for 3 seconds (2 beeps)
Friendly reminder:
Hydrogen is the smallest, lightest element in our universe. That means it will try to evaporate out of the water if not consumed immediately.
After you run a cycle with your H2GO, all of the water inside becomes the supplement. That means to get the most H2, you need to drink it quickly before the hydrogen escapes.
This is why the H2GO was lab-engineered to be 8oz!
The following dose recommendations are designed to meet your body’s needs depending on your demand.
Minimum Dose: 0.5 mg/L
The minimum therapeutic dose for anyone is 0.5mg/L which is 0.5 PPM or 500 PPB.
Average Dose: 3 mg/L
For everyday wellbeing, EVOLV recommends least 3 bottles of H2GO a day.
Athletic Dose: 4-5 mg/L
If you’re all about boosting your athletic performance, go with 4-5 bottles.
Recovery Dose: 5-6 mg/L
And for those tough recovery days after a hard workout or recovering from an injury, 5-6 bottles is your go-to.
Concerned? Hydrogen water has been granted GRAS (Generally Recognized As Safe) status by the FDA. This status highlights its high safety profile for consumption.
H2, The SMART Antioxidant
Hydrogen is a revolutionary antioxidant, so small that 200,000 molecules can span the width of a hair.
Its tiny size allows it to penetrate cell membranes and reach areas other antioxidants can't. Hydrogen targets harmful free radicals while sparing beneficial ones, promoting cell health without disrupting natural processes.
This makes it a powerhouse in cellular repair, setting new standards for antioxidants.
H2 Water and Oxidative Stress
Oxidative stress results from an imbalance between free radicals and antioxidants, leading to cell damage. Hydrogen, as a potent antioxidant, helps neutralize harmful free radicals, potentially reducing cell damage and promoting better health.
Hydrogen water can help:
-
Reduce Inflammation:
Helps alleviate inflammation in the body
-
Workout Recovery:
Speeds up recovery time after exercise and reduces muscle soreness
-
Increase Energy:
Enhances vitality and reduces fatigue
-
Reduced Stress:
Helps lower oxidative stress levels in the body
-
Enhanced Focus:
Promotes sharp mental clarity and cognitive function.
You absolutely want to drink a lot of water. But you do not want to replace your regular water bottle with the H2GO…
Why?
Molecular hydrogen is a supplement. And you wouldn't want to take your supplements all day long.
If you drank hydrogen water all day long, you would become desensitized to h2 which is not what you want. The H2 needs to enter your body and spike your levels very quickly so it can enter your organs and perform its duties. Then it evaporates out of your body after 30-45 mins.
The H2GO uses an electrolysis process to infuse the water with H2.
Water molecules are held together by covalent bonds. A covalent bond, in this case, is where oxygen and hydrogen atoms share electrons.
During electrolysis, the electric current breaks the covalent bonds, separating the water into hydrogen and oxygen glasses.
We use the highest standard SPE/PEM filter with a release valve to create, purify and vent the waste byproduct out ensuring the water remains pure. See our SGS report here .
Once produced, the hydrogen gas dissolves into the water contained in the bottle.
To prevent the tiny h2 molecules from escaping into the atmosphere, the H2GO is equipped with a high pressure seal and extremely strong components to capture and dissolve the hydrogen using immense pressure (150 psi). This ensures that the hydrogen gas remains dissolved in the water long enough for you consume in a few gulps.
We run surprise contests, giveaways and exclusive sales events all the time.
-
Follow us on social media
to be a part of the H2GO journey (
)
-
We have an awesome
partner program
that rewards you for helping us spread the word. Share the benefits of hydrogen water with others and earn rewards at the same time. Check it out and sign up here:
If you're interested in the science behind hydrogen water, we've got you covered.
Visit www.hydrogenwaterstudies.com to explore a wealth of research and studies that highlight the numerous benefits of hydrogen-infused water.
Hydrogen Water offers you the full advantages of antioxidants, including increased energy, enhanced focus, and decreased inflammation. Our extensive research has uncovered over 3,000 studies supporting the transformative effects of hydrogen-enriched water.
Check out the H2 database here: HydrogenWaterStudies.com
While there isn't a standard daily recommended dose of hydrogen water, studies and lab research indicate getting to a minimum of 3 PPM dose each day will allow you to feel the positive effects of hydrogen water. It is important to consult with a healthcare professional to determine the appropriate dosage based on individual health needs.
Hydrogen water acts as a potent antioxidant, supported by research demonstrating its capacity to efficiently cleanse fine particles from both the bloodstream and lungs. These particles, often originating from harmful environmental pollutants like pollution, pose health risks and may contribute to the development of various diseases.
Our proprietary system filter and cleans your water by expelling all waste and chemicals that might be present through a release valve located at the bottom of the bottle.
Hydrogen enriched water acts swiftly upon consumption, with hydrogen being quickly absorbed and beginning its protective actions against free radicals. This rapid process ensures immediate cell protection and health benefits, promoting vitality and energy. Consistent consumption of hydrogen water maximizes its benefits, akin to maintaining a healthy diet for sustained well-being.
The addition of hydrogen into water does not add or change the taste of the water. The only thing that gives water a taste are contaminants, such as chemicals, metals, or minerals. Many customers report that hydrogen water is the best-tasting water they’ve had.
We designed our bottle based on research backed studies. The H2GO is designed to give you the most concentrated dose 5 PPM of hydrogen. The shelf life of hydrogen requires immediate consumption. Thus, a larger volume of water becomes excessive especially if the concentration of hydrogen less than the H2GO's 5 PPM.
Hydrogen water will last in an unopened H2GO bottle for up to 10 days. If the bottle is open Hydrogen’s half-life is 2 hours, this means every 2 hours, there is half the molecular hydrogen available in the bottle! Hydrogen is the smallest element in the universe, as such it is challenging to keep it contained for very long. Another reason for our 8 ounce design.
Of course you can! Many of our athletes pour their hydrogen water into a cup and gently mix with their supplements. Keep in mind that additives may impact the molecular structure of the water, and stirring will release the dissolved hydrogen faster. So you may have to drink more water to get the same amount of hydrogen as unflavored water.
For regular cleaning, remove the base before washing the container with mild detergent.
Never submerge the base of the bottle. If needed, spot clean the outside with a damp cloth, keeping the charging port dry at all times.
Once per month, descale your H2GO bottle. Fill it with warm water and add a few drops of white vinegar or citric acid. Let it soak for 45 minutes.
Do not let the membrane dry out, so it's important to re-assemble your bottle after cleaning and refill with water. You may also leave a tiny amount inside if you prefer to throw out the water before your next use.
Always re-assemble and store your H2GO bottle with a small amount of water inside to keep the membrane hydrated. If you're storing it long-term, use distilled water and replace the water as needed.
The H2GO battery is rated for 70-75 minutes of continuous use. That's approximately 7 x 10 min cycles or 14 x 5 min cycles.
Firmly press and slightly twist the cable where it connects to the battery to get a better connection. It might seem a bit annoying, but it should help!
If it still doesn’t make a connection, or it's too much of a hassle, contact customer support and we’ll arrange a swap for you right away.
Replacement cables are available here .
There is an exact way to activate your cycles. It's a waterproof design, so here's how it works:
To activate, quickly press the power button once, quickly (1 beep)
Press 2x if you want 10 minutes (2 beeps)
To turn off or cancel: press and hold the power button for 3 seconds (2 beeps)
It's important to not press and hold the button for any amount of time as that will trigger the off function.
Also please make sure to remove the protective cap from the base of the bottle by unscrewing the bottom from the clear bottle.
If you've accidentally left it running with the cap on, you will need to run 2 cycles at 10 minutes back to back to rehydrate the h2 membrane.
Quick Start Guide: https://www.youtube.com/watch?v=IQsFkWEYVyc
If you see a few big bubbles like these in your H2GO, that simply means the protective cap is still installed in the center of the bottle:
Simply unscrew the base of the bottle, remove the protective cap, and watch your worries fizzle away!
To avoid leaks, do not overfill your bottle to the brim.
Leave a small amount of room at the top so the hydrogen can dissolve back into the water. If you don't, the hydrogen will force itself out of the bottle due to the 150 PSI of pressure it creates (a regular car tire holds about 34 PSI, so it's a decent amount of force).
Ensure your bottle lid and base are cranked as tight as possible to create an airtight seal during the H2 cycle.
You can order replacement seals here .
Take a look inside your lid to make sure the compression seal is in place. It is the silicone ring that looks like a gear in the photo below. It needs to be secure inside the lid for your H2GO to build up pressure. If it is missing or damaged, it will need to be replaced to infuse the H2
into the water properly.
You can purchase a replacement seal here .
Still have questions?
Can’t find the answer you’re looking for? Please chat to our friendly team.
Contact us
